How to Reduce the Operational Cost of Your Swimming Pool?
Having a personal swimming pool means adding luxury to your home. You don’t have to pay at expensive resorts or swimming academies to enjoy swimming. Also, you don’t have to confine yourself to a certain time limit. It’s because, with a swimming pool at home, you can enjoy swimming without any restriction and without paying a single buck. The only disadvantage is its operating cost. It requires regular maintenance and servicing for proper functioning.
We know the operational cost of the swimming pool can sometimes be hard on your pocket but this does not mean you won’t get it and enjoy the luxury of swimming at home without any limitation. In this post, we will discuss a few simple tips and tricks to reduce the operational cost of your swimming pool.
Get swimming pool shades– The swimming pool shades cover part or all of the swimming pool and prevent the accumulation of debris. You will find no debris floating in the water, making the cleaning process easy and inexpensive. In simple words, the swimming pool shade act as an extra layer of protection against falling debris. Also, the shades reduce evaporation and the amount of chemicals needed.
Put pool chemicals at night– Generally, people put chemicals into the pool during the day so that they can swim without any worries. But, you should change this schedule and put the chemical at night. This will reduce your chemical cost by half. During the day, the chemicals used are degraded by ultraviolet light. Only a couple of hours of bright sunshine are enough to remove the chemicals from the water, which means a high amount of wastage.
Run the pump for short cycles– Running then filter means increasing your electricity tariffs. The electricity tariff is usually higher during the day, especially in the summer season. So, you should run the filter less instead of running it several hours at a time during the day. We know controlling the time for the filter is a bit difficult, so you should use a timer for the same. With the help of swimming pool shades, you don’t have to run the pump as often.
Clean the pump regularly and properly- When the filter is clogged, the pump has to work harder to function efficiently and effectively. And thus, the pump uses more energy. Not only this, but the same situation happens if the pump’s strainer basket or poolside skimmer baskets get clogged with debris. So, you should clean the filter and empty the strainer and skimmer baskets regularly.
Keep the stabilizer level right– The role of a pool stabilizer is to slow down the degradation process of chlorine by sunlight and increase the lifespan of the chlorine in the pool. Surprisingly, the lifespan of chlorine increases by anything between 5 and 10 times. But for good performance, you should keep the stabilizer level right. According to experts, the stabilizer level should be maintained at 30-60 ppm. Both high and low stabilizer levels won’t affect the chlorine in the pool. This will save you money on chlorine.
With these simple tips and tricks, we are sure you will reduce the operational cost of your swimming pool. Other than this, we recommend taking help from professionals wherever and whenever necessary.
